gottso
first timer
Reged: 05/28/04
Posts: 12
|
|
Im finishing up a paver patio and I need to make a few cuts on some bricks.
I used a 4in brick set and hammer on a few and it works 'ok'. the cut is really rough, but I was able to hide the rough edge enough so its not noticeable.
I went and bought a diamond edge saw blade tonight in thoughts of popping it onto my circular saw and cutting the brick.
Am I wrong in thinking that I can just use any ole 12v cicular saw(7in blade) to do this? Or do I need a special circular saw that is made for masonry labor?
Thank you.
|
boyes37
fanatic
Reged: 02/22/04
Posts: 477
Loc: Canada
|
|
The dust from the cutting will kill your saw .....thats why they use wet saws for this purpose
--------------------
Boyes37
|
boat
Carpal Tunnel
Reged: 02/23/02
Posts: 4547
|
|
Why not use an 4"1/2 angle grinder i use a 9" grinder blades are cheap.
http://www.ehow.com/how_12071_choose-circular-saw.html
|
Previous
Index
Next
Threaded
Edit
Reply
Quote
