| jeff1 |
| (Carpal Tunnel) |
| 01/13/05 04:47 PM |
|
Re: GE Profile Dishwasher Leaking
|
In reply to:
How hard are those parts to change out for someone who has no experience when it comes to working on appliances?
Something that may help...link is here
In reply to:
So you are basically saying it is one of the things you posted that is more than likely making it leak, correct?
Correct, The pics show where the water is dripping off of but not where it may be comming from. Yes it can be bad seals inside the motor and pump assembly = a leak where the plastic body and metal motor meet one another. The pump connector above the motor and pump assembly can develope a pin hole and leak, the water drips off of the motor as well. If the water is coming from the motor and pump assembly next is to see if seals only are required ( motor shaft not rusted ) or is the whole motor and pump assembly needs to be replaced ( motor shaft is rusted ).
Changing the motor and pump assembly complete is easier than taking it out, apart, repairing and then back in again.
jeff.